VW 507.00 Diesel Engine Oil: What It Is and When to Use It

The short answer
VW 507.00 is a Volkswagen Group engine oil approval used mainly for diesel engines, especially those with a diesel particulate filter (DPF) and those on Volkswagen's extended LongLife service intervals. If your owner's manual or service booklet lists VW 507.00, choose an oil whose label states the 507.00 approval for the viscosity grade the manual allows. This is usually a 5W-30, though some 0W-30 products also carry the approval.
Several conditions change this answer. Some newer Volkswagen Group diesels require a different approval, such as VW 509.00, and 507.00 oil is not a correct substitute in those engines. Your service plan, whether fixed-interval or LongLife, can also affect the requirement. Requirements vary by model year, market and engine code, so confirm against the documentation for your exact vehicle.
What the 507.00 approval means
Volkswagen publishes its own oil specifications, called norms, that go beyond general industry ratings. An oil carrying a VW norm has been approved by Volkswagen against that standard. VW 507.00 describes a low-ash oil, often called low-SAPS. SAPS stands for sulphated ash, phosphorus and sulphur, which are additive by-products that can clog a DPF or harm exhaust after-treatment over time. The norm is also intended to support long drain intervals.
VW 504.00 is the matching approval for petrol engines. Many oils are labelled 504.00/507.00 because a single product meets both norms. That is convenient for households with more than one Volkswagen Group vehicle, but the label still has to match what each car's manual requires.
Which vehicles generally call for it
VW 507.00 is commonly specified for TDI diesel engines across Volkswagen, Audi, SEAT, Skoda and other Volkswagen Group brands, particularly models fitted with a DPF. It also replaced several earlier diesel approvals, so it is often listed as acceptable for engines that originally specified VW 505.00, 505.01, 506.00 or 506.01.
The brief supplied no model-by-model or year-by-year compatibility data, so this article cannot confirm whether a particular vehicle requires 507.00. The same model name can use different engines, and the oil requirement can differ by market or trim. Check one of the following for your vehicle:
The engine oil section of the owner's manual for your model year and market; The service booklet or digital service record, which may show whether the car is on LongLife or fixed-interval servicing; The engine code, found on the vehicle data sticker or in service paperwork, which a dealer or parts supplier can use to confirm the approval; A franchised dealer's service department, if the documents are missing or unclear
When 507.00 is not the right choice
Some recent Volkswagen Group diesel engines specify VW 509.00, which typically uses a lower viscosity such as 0W-20. That approval is not interchangeable with 507.00. Using 507.00 oil where 509.00 is required does not meet the manufacturer's specification. The reverse is also true: a 509.00 oil should not go into an engine that calls for 507.00 unless the manual explicitly allows it.
Older diesel engines built before 507.00 existed may list other approvals. Whether 507.00 is acceptable in a specific older engine depends on Volkswagen's guidance for that engine, so check the manual or ask a dealer rather than assuming compatibility. Some engines also restrict which viscosity grades are permitted. An oil with the right approval but a viscosity grade the manual does not list is still the wrong oil.
How to read an oil label
Look for wording that clearly states the oil carries the VW 507.00 approval. Wording such as "suitable for" or "recommended for use where VW 507.00 is required" may indicate that the manufacturer has not obtained the official approval. If the wording is ambiguous, check the oil manufacturer's product data sheet or choose a product that states the approval directly. Labels may also list an ACEA category, a European industry rating. That rating is useful context, but it does not replace the VW norm when the manual specifies one.
Situation | Suggested next step; Manual lists VW 507.00 | Buy oil labelled with the 507.00 approval in a viscosity grade the manual permits; Manual lists VW 509.00 | Do not use 507.00; buy oil carrying the 509.00 approval; Manual lists 505.01, 506.00 or 506.01 only | Ask a dealer or check Volkswagen's guidance for that engine code before using 507.00; Manual unavailable | Get the engine code and confirm the approval with a dealer or parts supplier
Information not covered here
This article does not include prices, specific brand recommendations, oil capacities, drain intervals or compatibility lists for individual models, because no verified data on those points was provided. Those details depend on the exact vehicle and should come from the owner's manual, the service schedule or a dealer.













