Nissan Altima Wheel Bolt Pattern by Year
Direct Answer and Scope
The wheel bolt pattern for a 2013 Nissan Altima is 5x114.3 millimeters. This means the wheel has five lug holes arranged on a circle with a diameter of 114.3 millimeters. The same 5x114.3 pattern applies to the 2015 and 2016 Nissan Altima. This specification is consistent across the standard sedan lineup for those model years in the North American market; however, trim level or optional wheel size does not change the bolt pattern itself.
Why the Bolt Pattern Stays the Same
The 2013, 2015, and 2016 Altima all belong to the same vehicle generation, which ran from the 2013 model year through 2018. Within a single generation, automakers typically keep the hub and brake architecture unchanged, so the wheel bolt pattern remains stable. A wheel that fits a 2013 Altima will generally bolt onto a 2015 or 2016 Altima, assuming the wheel diameter, width, offset, and center bore are also compatible.
Related Fitment Numbers That Matter
The bolt pattern is only one part of wheel fitment. For the 2013, 2015, and 2016 Nissan Altima, the center bore is 66.1 millimeters. This is the hole in the middle of the wheel that centers it on the hub. The factory lug nut thread size is M12 x 1.25. If you are buying aftermarket wheels, the wheel's center bore must be at least 66.1 millimeters. If it is larger, you will need hub-centric rings to avoid vibration.
Common Confusion and Gaps
Some older Nissan models, such as certain four-cylinder Sentras or Versas, use a 4-lug or a different 5-lug pattern. However, the published specification for the 2013 through 2016 Altima is uniformly 5x114.3. The supplied evidence does not include measurements for the Nissan Altima coupe that was still sold during the 2013 model year in some markets. That coupe is a distinct body style from the sedan and has a different model code. If you have a 2013 Altima coupe rather than a sedan, treat the 5x114.3 pattern as unconfirmed for your specific vehicle and verify before buying wheels.
Practical Takeaway
For the 2013 Nissan Altima sedan, the direct wheel bolt pattern answer is 5x114.3. The 2015 and 2016 Altima sedans share that same 5x114.3 pattern. When shopping for replacement or aftermarket wheels, check center bore, lug nut seat style, offset, and load rating in addition to the bolt pattern. The pattern number is necessary but not sufficient for safe fitment on your own vehicle.