Nissan Altima wheel bolt pattern
Choosing replacement wheels for a 2007 Nissan Altima starts with a detail that is easy to overlook until the new rim will not seat: the wheel bolt pattern. This measurement describes how the lug holes are arranged on the hub, and it must match the wheel exactly for safe mounting. The pattern is separate from wheel diameter, width, offset, and center bore, but it is just as important. A small difference here can prevent installation or create dangerous stress at the studs, so confirming the arrangement before buying wheels or spacers avoids an expensive fitment error.
Essential answer
The 2007 Nissan Altima uses a five-lug wheel bolt pattern with a 114.3 millimeter bolt circle. In common fitment shorthand this arrangement is written as 5x114.3, meaning five lug holes are spaced evenly around a circle whose diameter is 114.3 millimeters. The same dimension is sometimes called 5x4.5 when measured in inches. Drivers may see either expression on wheel listings, packaging, or fitment guides, but they refer to the same physical spacing for this generation of the Altima.
The bolt pattern applies to the hub, so it stays consistent across most trim levels, body styles, and powertrain configurations for that model year unless a vehicle has been modified. However, the measurement is only one part of wheel compatibility. Wheel diameter, width, offset, and the hub center bore also affect whether a replacement wheel will clear the brake components and suspension. A wheel can have the correct bolt pattern and still rub, sit too far inward, or fail to center properly if those other dimensions do not match the vehicle.