Range Rover Wheel Bolt Pattern

Wheel bolt pattern is a core fitment dimension that decides whether a replacement wheel can be safely mounted. For Range Rover owners, this question matters when shopping for aftermarket rims, winter sets, or used factory wheels. The specification is usually expressed as a bolt count and a pitch circle diameter. Because Land Rover has produced several model generations and market specifications, the correct value can shift by model year, trim level, and powertrain configuration. Checking the exact hub layout prevents ordering a visually similar wheel that will not seat properly on the studs.
Essential answer
Most modern Range Rover models share a five-lug wheel bolt pattern with a pitch circle diameter that is common across many full-size SUVs. The measured circle runs through the center of each wheel stud or bolt hole, not across the outer edge of the hub. Owners should treat a single published number as a starting point rather than universal proof. A full-size Range Rover from one generation may use a different specification than a Range Rover Sport or an early model, so the exact year and platform define the appropriate answer.
The pattern cannot be confirmed by counting studs alone because several vehicles use five lugs while placing them on a different bolt circle. A wheel with the correct center bore but an incompatible pitch circle will balance poorly or refuse to seat. Equally important is the lug seat style and thread engagement, which vary with the factory wheel design. When a used wheel or aftermarket rim is advertised by diameter and width only, verifying the bolt pattern separately prevents a time-consuming and potentially unsafe fitment error.











