Mitsubishi Eclipse Wheel Offset

Wheel offset shapes how a Mitsubishi Eclipse sits, steers, and clears its suspension. When owners compare aftermarket rims for different generations, they often focus on rim diameter and bolt pattern but overlook this hidden measurement. Offset is the distance between the wheel’s mounting face and its true centerline, expressed as positive, negative, or zero. Choosing the wrong value can move the tire inward toward the strut or outward past the fender, changing steering feel and causing contact under suspension travel.
Essential answer
Wheel offset for a Mitsubishi Eclipse is the relationship between the hub mounting surface and the geometric center of the rim barrel. A positive offset pulls the wheel inward, common on front-wheel-drive platforms where the hub sits closer to the outer face. A lower or negative offset pushes the tire outward, altering the scrub radius and the arc the wheel follows when turning. The correct setting keeps the contact patch centered enough to avoid rubbing while preserving the suspension geometry the factory engineered for predictable handling.
Different Eclipse generations and trim levels can use distinct hub faces and suspension clearances, so the appropriate offset varies with rim width and tire compatibility. A wider wheel with the same offset gains half its extra width on each side of the centerline, moving the inner lip closer to the strut and the outer lip toward the fender. Owners evaluating fitment must therefore treat offset, rim width, and tire section width as a single clearance package rather than matching a number in isolation.









