Infiniti Wheel Bolt Pattern by Model
Finding the correct Infiniti wheel bolt pattern matters before replacing wheels, fitting spacers, or shopping for a winter set. The bolt pattern is not a single brand-wide number; it can vary by vehicle model, model generation, and even trim or powertrain configuration. A Q50, G35, and G37 may share common layout principles, but owner confirmation is still wise. Understanding how the pattern is measured and why it must match the hub helps avoid fitment mistakes, vibration, and damaged hardware.
Essential answer
The essential point is that an Infiniti wheel bolt pattern describes the number of lug holes and the diameter of the circle they form. Many rear-drive and all-wheel-drive Infiniti sedans and coupes use a five-lug arrangement, but the pitch circle diameter can change between model generations. A Q50 is often grouped with other Infiniti car platforms, while a G35 or G37 may have a similar pattern depending on body style and market specification. Treat any widely repeated figure as a starting point, not a guarantee for every trim.
When a retailer or wheel listing says a wheel fits an Infiniti, the claim should still be checked against the car’s actual hub. The bolt circle must line up with the stud holes, and the center bore must seat correctly on the hub. Even a small difference in the pitch circle diameter can prevent mounting or cause the wheel to sit off-center. For this reason, the direct answer is best expressed as a family of likely five-lug fitments that must be confirmed by vehicle identification and physical measurement.