Nissan Rogue 12V Battery Size and Replacement: 2015 Model Year
The short answer
For a 2015 Nissan Rogue sold in North America with the standard 2.5-litre four-cylinder engine, replacement-battery fitment guides commonly list a BCI Group 35 battery. BCI group size is an industry code for a battery's case dimensions, terminal type and terminal layout. It does not describe the battery's capacity or power.
Treat Group 35 as the usual starting point rather than a guaranteed match. No manufacturer specification sheet, parts catalogue extract or measurement was supplied for this article. Confirm the size against your own vehicle before you buy.
Conditions that can change the answer
Rogue versus Rogue Select: In 2015, Nissan sold the second-generation Rogue alongside the Rogue Select, a carried-over first-generation model. They are different vehicles. Check which one you own before relying on any fitment listing. Market: The Rogue's counterpart in many markets outside North America is sold as the X-Trail. Battery specifications for those vehicles may differ, and regional fitment guides should be checked separately. Previous replacements: If the battery has been replaced before, the battery now in the car may not match the original specification. Read its label, but confirm it against the vehicle's specification rather than simply copying it. Trim and options: No evidence was available here showing whether trim level or factory options change battery requirements for the 2015 Rogue. Treat that as an unresolved gap and check it through a parts lookup that uses your trim or VIN.
How to confirm the right battery
Check the owner's manual or the specifications section for the stated battery type or capacity. Read the label on the installed battery. It usually shows the group size and the cold cranking amps (CCA). CCA measures how much current a battery can deliver for starting in cold conditions. Use a retailer or dealer parts lookup that asks for the year, model, trim and engine, or for the VIN. Compare terminal positions. A battery with the right footprint but reversed terminals may leave the cables too short to reach.
What to match when choosing a replacement
Match the group size first, so the battery fits the tray and the hold-down clamp and the cables reach the terminals. Then choose a battery whose CCA rating meets or exceeds the figure your vehicle specification calls for. The original CCA figure for the 2015 Rogue was not included in the material behind this article, so take it from the manual, the original battery label or a parts lookup.
Battery chemistry is also a choice. Conventional flooded and AGM (absorbent glass mat) batteries are both offered in common group sizes. This article had no evidence on whether the 2015 Rogue needs a specific type. If the manual or the existing battery specifies one, follow it.
Gaps to be aware of
This guidance did not draw on a supplied factory specification, so it does not state exact dimensions, CCA ratings, reserve capacity, prices or warranty terms. Before you buy, confirm these details against your vehicle's documentation or a VIN-based parts lookup.