2-Inch Receiver Trailer Hitch Ball Mount
Choosing a 2 inch trailer hitch ball mount means matching the shank to your receiver, the ball platform to your coupler, and the rise or drop to your trailer's level stance. The right configuration keeps the trailer frame parallel to the road, distributes tongue weight predictably, and avoids clearance problems during turns or driveway transitions. A few simple measurements narrow the field quickly.
The direct answer
Look for a ball mount with a 2-inch square shank that slides into the receiver tube, a hitch pin hole that lines up cleanly, and a platform drilled for the ball diameter stamped on your trailer coupler. The shank must be long enough for the pin hole to align behind the receiver edge while still leaving working clearance for the pin and clip. A mount that fits the receiver but cannot accept the pin is not usable.
The rise or drop should be chosen after measuring the difference between the receiver opening height and the trailer's level coupler height. If the loaded trailer sits level, measure both points on flat ground and pick a mount that offsets that distance. This keeps tongue weight applied as intended and helps the trailer track straighter. Confirm the mount's stamped capacity covers your trailer's gross vehicle weight rating.