Replace a lost Discovery TD5 key
Losing the key to a Discovery TD5 creates an access problem that involves more than cutting a new metal blade. The vehicle uses an immobilizer system that must recognize a programmed transponder before the engine will start, and many examples also have a remote transmitter for central locking. A replacement path therefore has to address the mechanical key cut, the electronic identity stored in the immobilizer, and proof that you are entitled to have the new access device programmed. Without that combined approach, a key that turns in the door may still leave the vehicle immobilized.
Essential answer
Replacing a lost Discovery TD5 key generally requires obtaining a new key assembly and then introducing its transponder to the vehicle security system through key programming. The exact procedure depends on the market, model year, and whether any working key remains. If a functioning key is still available, it may be possible to add another key to the immobilizer. With all keys lost, the vehicle usually needs a diagnostic session that communicates with the security module and stores the replacement key identity.
A mobile automotive locksmith or a Land Rover specialist is often the practical route, because the work combines mechanical cutting and electronic security access. You should be prepared to show proof of ownership and vehicle identification before programming is attempted. The lost key should also be considered a security concern, since a key that is merely missing may still operate the locks or start the engine if it is later found by someone else.













