Pontiac Fiero Wheel Bolt Pattern
Knowing the wheel bolt pattern on a Pontiac Fiero is essential when replacing wheels, selecting spacers, or troubleshooting vibration. This mid-engine sports car used a hub layout that must match both the number of lugs and the diameter of the circle they form. Because the Fiero’s production run covered several model years and trim levels, owners should confirm which specification applies to their car before ordering components. A correct match keeps the wheel centered and the lug seats loaded evenly, which supports stable handling and predictable braking on this lightweight platform.
Essential answer
The Pontiac Fiero used a four-lug wheel bolt pattern across its production run. In the United States market, this layout is commonly described as 4x100, meaning four wheel studs arranged on a 100-millimeter bolt circle diameter. The measurement is taken from the center of one lug hole across the hub to the center of the opposite lug hole, describing a circle that passes through all four centers. This compact pattern was shared with many front-drive compact cars of the era, which influenced the Fiero’s suspension and brake component choices.
Because the Fiero is rear-wheel drive with a mid-engine layout, the hub and wheel offset requirements differ from the front-drive vehicles that used similar 4x100 hubs. A wheel with the correct bolt pattern may still contact suspension arms, fender liners, or bodywork if its width and offset are not suitable. Later model years and different trim levels used various wheel widths and tire sizes, so the pattern remains consistent while the package dimensions change. Confirm the specific model year, generation, and body style before fitting aftermarket wheels.












