Mitsubishi Pajero Steering Angle Sensor Calibration

A Mitsubishi Pajero steering angle sensor calibration is the process of teaching the vehicle's stability control system where the steering wheel is pointed when the wheels are straight ahead. This often follows suspension work, alignment changes, or component replacement. Without a correct zero point, the system may misinterpret driver intent, triggering warnings or unwanted brake intervention.
Essential answer
Calibrating the steering angle sensor on a Mitsubishi Pajero requires resetting the sensor's zero point so the electronic stability control can accurately compare steering input with yaw, lateral acceleration, and individual wheel speed signals. The essential answer is to perform an initialization procedure, typically via a scan tool, after correcting any underlying alignment problem. Attempting calibration before confirming proper wheel alignment and centering the steering wheel only masks a mechanical issue, because the sensor learns a false center that fails as soon as driving conditions change.
The scope of this procedure depends on whether the Pajero uses an integrated sensor within the steering column assembly or a separate unit near the clock spring. In every case, the calibration is a learned reference, not a physical adjustment of gears or tie rods. If the wheel alignment is off, if a suspension mounting point is shifted, or if there is joint play, the sensor's electrical center will not match the true rolling direction of the front tires, causing the stability control to become intrusive or disabled.











