Group 24F Car Battery: Finding One at AutoZone or Menards
The short answer
Group 24F is a common battery size, and auto parts chains such as AutoZone generally list it in their replacement battery range. Stock, brands and options vary by store and change over time, so check the specific store before you go. Before buying, confirm that your vehicle actually calls for a 24F and not a similar size such as a standard Group 24. The terminal layout is the detail most likely to cause a fitment mistake.
What the 24F designation means
Battery group sizes are an industry standard published by the Battery Council International (BCI). Each size defines a battery's outer case dimensions, terminal type and terminal position. The 24 sets the case size. The F means the terminal polarity is reversed compared with a standard Group 24. Both sizes share the same case, but the positive and negative posts sit on opposite sides.
This matters because battery cables are cut to reach posts in specific positions. If you install the wrong polarity variant, the cables may not reach. Forcing them can strain the cables or risk connecting them the wrong way round.
Conditions that change the answer
Model year, trim and powertrain: the correct battery group can differ within a single model line, so match the battery to your exact vehicle rather than to the model name alone. Factory battery type: some vehicles, particularly those with engine start-stop systems, are designed for an AGM (absorbent glass mat) battery rather than a conventional flooded battery. Replacing an AGM with a flooded unit can shorten battery life or affect charging behavior. Cold cranking amps (CCA): this rating measures how much current a battery can deliver for starting in cold weather. A replacement should meet or exceed the CCA in your owner's manual or on the original battery's label. Hybrid and electric vehicles: these often use a 12-volt auxiliary battery with requirements of its own. Confirm the specification for that system before assuming a standard 24F applies. Previous replacements: if an earlier owner installed a non-factory battery, the battery now in the car may not reflect what the vehicle was designed for.
How to confirm the right fit
Start with the owner's manual or the label on your current battery, which usually shows the group size and CCA rating. Retailer fitment tools that ask for year, make, model and engine are a useful cross-check. Treat any mismatch between those sources as a reason to look closer, not as a reason to pick whichever battery happens to be in stock. At the counter, compare the new battery's terminal positions against your old one before leaving.
Shopping at AutoZone versus Menards
AutoZone is a dedicated auto parts retailer, so car batteries are a core product category there. Menards is a home improvement chain. Whether a given Menards location stocks Group 24F batteries, and which brands it carries, could not be confirmed here. Check the store's current listings or call ahead.
Whichever retailer you choose, compare the same details: group size, flooded versus AGM construction, CCA rating, warranty terms, and whether the store accepts your old battery for recycling or charges a core fee that is refunded when you return it.
What this guide does not cover
No retailer data was available for this article, so it does not state prices, current stock levels, specific product lines, warranty lengths or measured performance figures for any 24F battery. Check those details directly with the retailer for your vehicle and location.